How to resolve Parallels Desktop network disconnection

In this article.Parallels DesktopThis section describes what to do when the network of the company is not connected to the Internet.

What to do if the Parallels network does not connect

Remove network interfaces and disable Internet sharing

Step 1: Select "Utilities

Start Finder and select "Utilities" from "Applications".

Step 2: Double-click [Terminal

Double-click [Terminal] to launch the tool.

Step 3: Run sudo rm

Run sudo rm. Enter the following command

/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist && sudo killall -9 configd command.

Step 4: Restart the computer

Restart the computer.

Step 5: Disable Internet sharing

[Under System Preferences, locate the Sharing preference pane. Disable Internet Sharing.

Check network adapter settings and the presence of network adapters

Step 1: Launch the Parallels Desktop application

Click the Parallels icon on the Mac menu bar and select "Control Center.

The Parallels Desktop Control Center appears.

Step 2: Click on the [gear] icon

Installed virtual machines are shown here.

Once activated, the Control Center appears.Click the [gear] icon of the virtual machine for which you want to configure network settings.

Step 3: Click on "Hardware

Click on "Hardware" at the top of the settings window.

Step 4: [Network].Click on

[Hardware]and select[Network]Click on

Please confirm that the network settings exist in the left frame of the screen.

Step 5: Verify that the [Source] is a shared network or a bridged network.

If you are already connected to a shared or bridged network, switch to a different configuration and then switch again.

If Wi-Fi is selected, the connection may be denied due to the MAC address filtering settings of the Wi-Fi router (Airport Extreme, Time capsule, etc.).

Disable firewalls and anti-virus software.

Disable all firewall and anti-virus software on both Macs and virtual machines.

Once the network is functioning properly, these firewalls and antivirus should be re-enabled and set up so that they do not block access to the web or Mac by the Parallels Desktop virtual machine.

Mac-Disabling the Firewall

Step 1Launch "System Preferences" from the Apple menu.

Step 2:[Click on the Security and Privacy icon.

[Click on the Security and Privacy icon.

Step 3:[Click on "Firewall.

Click on the top tab menu [Firewall].

Step 4:Click on the key in the lower left corner.

To configure the firewall, click on the key in the lower left corner.

Step 5:[Click "Unlock.

Enter the password and click "Unlock".

Step 6:[Click on "Turn off firewall.

[Click on "Turn off firewall.

Click on the key in the lower left corner so that it cannot be changed at the end.

The firewall is now turned off.

Virtual Machine - Disable Firewall

Step 1:[Click the Settings button, then click Firewall and Search.

Step 2:Select[Apps via Windows Defender]Select the

Step 3:[Select "Disable Windows Firewall" and click "OK.

Select "Disable Windows Firewall" for the network for which you want to disable the firewall and click "OK".

summary

In this article.Parallels Desktopexplained what to do when the network of the "Mere Old Man" is not connected to the Internet.